Manage Non-Events Monitoring
Take full control of your Non-Events monitoring with Nodinite. Use this page to empower your teams to manage, configure, and optimize Non-Events monitoring through a flexible self-service portal. Set thresholds, perform remote actions, and ensure operational excellence with minimal risk and maximum agility.
✅ Proactively manage monitoring thresholds and perform remote administrative actions on Non-Events configurations
✅ Empower business and IT teams with a secure, flexible self-service portal
✅ Minimize risk and disruption to mission-critical services
✅ Gain real-time insights and respond instantly to anomalies

Animated walkthrough: edit the search time span and the Min counts of the Contoso: Invoices per day check, Save, and see the Resource re-evaluated as OK.
- In a Monitor View, click Action on the Non-Events Resource and select Edit under Control Center.
- Change the Search time span and the Min values of the Warning thresholds and Error thresholds.
- Click Save. The agent evaluates the check on its next scheduled run, and the Monitor View shows the new state on the Monitoring Service's next poll (about a minute each on a default setup).
| Application Management Team | IT Operations | Business |
|---|---|---|
| Gain quick insights into traffic anomalies | Stay alert and fix issues before the business is impacted | Receive alerts if business transactions are missing |
Features
Nodinite Non-Events Monitoring Agent delivers these powerful features:
- Manage Monitoring for the Non-Events Monitoring Agent
- Remote Configuration – As an Administrator with access to Monitoring Agents from the Remote Administration dialog, you can:
- Add and Remove configurations
- Enable and Disable monitoring
- Manage Interval Scheduling
- Edit thresholds
See the global Configuration user guide for more details
- Perform Remote Actions
Show Log View Action
Every Non-Events category includes the Show Log View action. Use this action to go directly to the Log View with Log Events included in the current monitoring.

The Show Log View action under Control Center.
The configured Log View opens, searched over the evaluated window (the search time span, ending now). The Show the Log View link in Details does the same:

The Log View that the check counts, opened with its search. No invoices in the last day explains the Error state.
Clear the alert
You can use the Clear the alert action in every Non-Events category to ignore any previous errors that occurred earlier than the current moment. This resets the error state and allows monitoring to continue from now forward. The action sets the configuration's Clear Date, which Details shows as Clear Time.
If your monitored Log View uses comment-based filtering, you can also clear or suppress recurring alerts by updating comments on relevant Log Events. For guidance, see Tip: Clear alerts using comments in a Log View.
New 7.x Version 6.2.3.0 behavior change: Prior to version 6.2.3.0, this action suppressed errors for the remainder of the day. This behavior is now available through the Ignore for today action.

The 'Clear the alert' action ignores previous errors earlier than now.
A confirmation prompt appears:

Click Yes to clear the alert, or No to keep it.
Ignore for today
You can use the Ignore for today action in every Non-Events category except the Monthly Interval to suppress ALL errors for the remainder of the current day. This is useful when you experience a known issue and want to prevent alert notifications until the next day.
New 7.x New in version 6.2.3.0: This action provides the original "Clear the alert" behavior from earlier versions, allowing you to ignore errors until midnight.

The 'Ignore for today' action suppresses errors until the end of the day.
A confirmation prompt appears:

Example of the confirmation prompt.
If the operation is successful, a message will appear.

The agent stops evaluating events older than the end of the current day (UTC).
The Resource turns OK, with a Log Text that says why:

After Ignore for today, the Resource is OK until the next day.
Full Interval
The Category 'Full Interval' provides one resource for each Configuration with its Full Interval enabled, and displays the configuration name as the Resource name.

This example from a Monitor View shows a list of monitored manageable configurations.
You can use the following Remote Actions for the Full Interval non-events Category:
- Show Log View
- Details for full interval
- Edit thresholds for full interval
- Clear the alert
- Ignore for today

The dropdown menu shows available Remote Actions.
Edit thresholds for Full Interval
Edit thresholds for the selected 'Full interval' configuration by clicking the Action button and then Edit in the 'Control Center' section.

Click the 'Edit' action to manage alert thresholds.
The Edit Full Interval Thresholds modal appears:

The Edit alert thresholds modal lets you update the selected non-events configuration.
You can manage:
- Description
- Search time span (format days.hours:minutes:seconds, so
7is seven days; it affects all partial intervals for this configuration) - Clear Date (ISO format; events older than this date are not evaluated)
- ⚠️ Warning thresholds (Min, Max, Log Text)
- ❌ Error thresholds (Min, Max, Log Text)
A Min of 1 or more turns that check on; a Max of -1 turns it off. A Log Text you enter replaces the default text the agent writes. Save writes the agent's configuration; the agent evaluates on its next scheduled run, and the Monitoring Service shows the new state on its next poll.
Details for Full Interval
View details for the selected Full interval configuration by clicking Details in the 'Control Center' section.

Click the 'Details' action to view configuration details.
A modal appears:

The details page shows the Full interval non-events configuration.
Details shows the Start and End of the evaluated window, the Description, Clear Time, Number of Logged Events, Search time span, and Authentication, plus the accordions Evaluation thresholds, Schedules (n), and Ignore dates.
Click
Show the Log Viewto access the underlying Log View for further data exploration.
Partial Interval
The Category 'Partial Interval' provides one resource for each partial interval of a Configuration. The Resource name is the interval's Display Name, and the Application is the configuration name.

This example from a Monitor View shows a monitored partial interval.
You can use the following Remote Actions for the Partial Interval non-events Category:
The Show Log View, Clear the alert, and Ignore for today actions work as described above.
Edit thresholds for Partial Interval
Edit thresholds for the selected 'Partial Interval' configuration by clicking Edit in the 'Control Center' section.

Click the 'Edit' action to manage alert thresholds.
The Edit thresholds modal appears:

The edit alert thresholds modal lets you update the selected non-events configuration.
You can manage:
- Partial interval type
- Clear Date Time
- Start Day and End Day (Monday–Sunday)
- Start time and End time (Agent local time, 00:00:00–23:59:59)
- ⚠️ Warning thresholds (Minimum, Maximum, Log Text)
- ❌ Error thresholds (Minimum, Maximum, Log Text)
To rename the Resource, change the interval's Display Name in the Remote Configuration. At the bottom, the Ignore dates accordion lists the dates this check skips.

The Ignore dates accordion of a partial interval.
Details for Partial Interval
View details for the selected Partial Interval configuration by clicking Details in the 'Control Center' section.

Click the 'Details' action to view configuration details.
A modal appears:

The details page shows the Partial interval non-events configuration.
Click
Show the Log Viewto access the underlying Log View for further data exploration.
Partial interval Multiple Days
The Category 'Partial Interval - Multiple Days' provides one resource for each such interval, named after the interval's Display Name.

This example from a Monitor View shows a list of monitored manageable configurations.
You can use the following Remote Actions for the Partial Interval - Multiple Days non-events Category:
Edit thresholds for Partial Interval Multiple Days
Edit thresholds for the selected 'Partial Interval - Multiple Days' configuration by clicking Edit in the 'Control Center' section.

Click the 'Edit' action to manage alert thresholds.
A modal appears:

The edit alert thresholds modal lets you update the selected non-events configuration.
You can manage:
- Clear Date Time
- Days (Monday–Sunday)
- Start time and End time (Agent local time)
- ⚠️ Warning thresholds (Minimum, Maximum, Log Text)
- ❌ Error thresholds (Minimum, Maximum, Log Text)
Details for Partial Interval Multiple Days
View details for the selected Partial Interval - Multiple Days configuration by clicking Details in the 'Control Center' section.

Click the 'Details' action to view configuration details.
A modal appears:

The details page shows the Partial Interval - Multiple Days non-events configuration.
Click
Show the Log Viewto access the underlying Log View for further data exploration.
Partial Interval Sliding Window
The Category 'Partial Interval - Sliding Window' provides one resource for each such interval, named after the interval's Display Name.

This example from a Monitor View shows a list of monitored manageable configurations.
You can use the following Remote Actions for the Partial Interval - Sliding Window non-events Category:
Edit thresholds for Partial Interval Sliding Window
Edit thresholds for the selected 'Partial Interval - Sliding Window' configuration by clicking Edit in the 'Control Center' section.

Click the 'Edit' action to manage alert thresholds.
A modal appears:

The edit alert thresholds modal lets you update the selected non-events configuration.
You can manage:
- Sliding Window Time span (days.hours:minutes:seconds)
- Clear Date Time
- Start Day and End Day (Monday–Sunday)
- Start time and End time (Agent local time, 00:00:00–23:59:59)
- ⚠️ Warning thresholds (Minimum, Maximum, Log Text)
- ❌ Error thresholds (Minimum, Maximum, Log Text)
Details for Partial Interval Sliding Window
View details for the selected Partial Interval - Sliding Window configuration by clicking Details in the 'Control Center' section.

Click the 'Details' action to view configuration details.
A modal appears:

The details page shows the Partial Interval - Sliding Window non-events configuration.
Click
Show the Log Viewto access the underlying Log View for further data exploration.
Partial Interval Sliding Window Multiple Days
The Category 'Partial Interval - Sliding Window - Multiple Days' provides one resource for each such interval, named after the interval's Display Name (here an auto-generated name, because the interval has none).

This example from a Monitor View shows a list of monitored manageable configurations.
You can use the following Remote Actions for the Partial Interval - Sliding Window Multiple Days non-events Category:
- Edit thresholds for partial interval - sliding window - multiple days
- Details for partial interval - sliding window - multiple days
Edit thresholds for Partial Interval Sliding Window Multiple Days
Edit thresholds for the selected 'Partial Interval - Sliding Window Multiple Days' configuration by clicking Edit in the 'Control Center' section.

Click the 'Edit' action to manage alert thresholds.
A modal appears:

The edit alert thresholds modal lets you update the selected non-events configuration.
You can manage:
- Sliding Window Time span
- Clear Date Time
- Days (Monday–Sunday)
- Start time and End time (Agent local time)
- ⚠️ Warning thresholds (Minimum, Maximum, Log Text)
- ❌ Error thresholds (Minimum, Maximum, Log Text)
Details for Partial Interval - Sliding Window Multiple Days
View details for the selected Partial Interval - Sliding Window Multiple Days configuration by clicking Details in the 'Control Center' section.

Click the 'Details' action to view configuration details.
A modal appears:

The details page shows the Partial Interval - Sliding Window Multiple Days non-events configuration.
Click
Show the Log Viewto access the underlying Log View for further data exploration.
Monthly Interval
The Category 'Monthly Interval' provides one resource for each monthly interval, named <configuration>, Monthly Interval: '<start>:st - <end>:th', for example Contoso: Orders per shift, Monthly Interval: '1:st - 28:th'.

This example from a Monitor View shows a list of monitored manageable monthly interval configurations.
You can use the following Remote Actions for the Monthly Interval non-events Category:

The dropdown menu shows available Remote Actions. A Monthly Interval has no Ignore for today.
Edit thresholds for Monthly Interval
Edit thresholds for the selected 'Monthly interval' configuration by clicking Edit in the 'Control Center' section.

Click the 'Edit' action to manage alert thresholds.
A modal appears:

The edit alert thresholds modal lets you update the selected 'Monthly interval' non-events configuration.
You can manage:
- Start Day and End Day (1–31, or negative to count from the month's end:
-1is the last day) - ⚠️ Warning thresholds (Minimum, Maximum, Log Text)
- ❌ Error thresholds (Minimum, Maximum, Log Text)
- History > Clear Date Time (ignore issues for the remainder of the period)
Caution
The Resource gets a new name if you change the start or end day.
Details for Monthly Interval
View Details for the selected Monthly Interval by clicking Details in the 'Control Center' section.

Click the 'Details' action to view configuration details.
A modal appears:

Example of the details page showing the Monthly interval non-events configuration.
Until the interval's end date and time has passed, the Monthly Interval doesn't evaluate the Minimum thresholds; the Maximum thresholds apply right away.
Click Show the Log View to access the underlying Log View; it opens with the Log Events included in the current monitoring.
Save
Tip
Save your changes to persist the updated configuration.
- Click 'Save' or 'Save and close' to persist your changes. The system evaluates the new settings/thresholds on the next synchronization.

The Save options let you persist your changes.
Note
The delay in presenting the new evaluated state depends on the synchronization interval set for the monitoring agent. Click the Sync Now button to force an immediate synchronization.
Save – Save pending changes
Close – Close the dialog without saving changes
Next Steps
Manage Monitoring
Configuration of the agent